Equipment rent

Mobile scenic complex

Attention to clients: prices for equipment rental on request.

The Prolyte mobile stage complex. This is a unique collapsible structure that has no analogues in the Republic of Belarus.

A mobile stage complex is a mobile concert stage equipped with sound, lighting and video projection equipment, the installation of which requires no more than two days.

This stage complex is designed for organizing and conducting show programs, presentations, large corporate events, promotions, city holidays, etc. The Palace provides full technical support for concert and entertainment events: staging and maintenance of a Mobile stage complex, setting up and operation of sound and lighting equipment.

Technical characteristics

Stage	Two variants: 1. Width 20m and depth 14m. 2. Width 12m and depth 10m.
Large-sized roof structure	Roof system ST. Rigid modular construction made of aluminum trusses. The elevator roof is raised by means of 8 electric winches. All winches have the ability to connect to a single controller. The cross-shaped roof module provides additional rigidity and stability and allows you to hang a variety of lighting and sound equipment in accordance with the scheme of concerts and other entertainment events.
Connecting tower trusses	The maximum length is 11.5 m (up to the ridge 14.7 m).
Stage platform	It can be installed at a height of 90 cm to 210 cm from ground level.
Inclined overpass	It has an anti-slip cover for transporting various equipment, musical instruments, etc. to and from the stage.
Tower	A free-standing, weather-protected tower with sound and light control panels, LED dynamics and sound.
Two small towers	Designed for television cameras and tracking spotlights from stairs.

The steel bases of the towers have rigidly fixed spacers, 4 spacers each.
The scenic design of the mobile stage complex has the ability to be used both outdoors and indoors.
The unified system of connecting nodes allows you to get almost any configuration of the stage platform, carry out its further expansion, add additional elements (ladders, safety railings, etc.).
The structural elements do not require the use of lifting equipment during installation.
To install a stage complex on a lawn, sand or other unstable ground, there is a set of foundation rigidity elements.
Anti-slip podium cover.

Hanging structure for LED screen (included)
Attention to clients: prices for equipment rental on request.

The Palace of the Republic is ready to provide you with an original design for hanging an LED screen manufactured by Wilhelm Layher GmbH & Co KG, Germany.

The structure is a spatial universal frame structure made of unified modular elements with a wedge connection, made of galvanized steel, to accommodate light (LED screens), sound and other equipment with a total payload of 20,000 kg. The design consists of elements of the same type, the installation dimensions of which allow, if necessary, to assemble structures of various configurations with a multiplicity of 2.07 m, a height step of 0.5 m.

Suspension beams provide the use of winches both by fixing them directly on the beam, and by fixing them at a distance. The structures are easy to assemble and disassemble, require a minimum of time for installation.

The base of the structure provides the possibility of its installation on an uneven surface, with adjustment of the height of the supports and weight.

Structural elements do not require the use of lifting equipment during installation.

Can be used both outdoors and indoors.

The trained staff of the Palace of the Republic will carry out detailed designs for specific customer equipment using specialized software for the design of various non-standard design options.

When ordering stage structures from us, you get an impeccably worked out event that meets all technical and safety standards, which guarantees the success of your event, taking into account the concept and your wishes.
Stage equipment
Attention to clients: prices for equipment rental on request.

Electric chain winch ChainMaster RigginLift BGV-D8 in the amount of 12 pieces:
- capacity 320 kg;
- chain length 28 m;
- double brake;
- supply voltage 380V;
- lifting (lowering) speed – 4 m/min.
Electric chain winch (chain 28 meters), art. SL10 1004 m2 A D8+, manufactured by Verlinde, France, in the amount of 40 pcs.:
- capacity 1 ton;
- chain length 28 m;
- double brake;
- supply voltage 380V;
- lifting (lowering) speed – 4 m/min.
Electric chain winches PROLYFT PLE-12-027 in the amount of 32 pieces:
- - capacity 1 ton;
  - chain length 27 m;
  - supply voltage 380V;
  - lifting (lowering) speed – 4 m/min.
Electric chain winches PROLYFT PLE-10-027 in the amount of 6 pieces:
- capacity 250 kg;
- chain length 27 m;
- supply voltage 380V;
- lifting (lowering) speed – 4 m/min.
Controllers 8-channel PLE-30-080 in the amount of 3 pieces for controlling eight winches simultaneously.
Controllers 2-channel PLE-30-020 in the amount of 8 pieces for simultaneous control of two winches.

TE-086 Lift Stand Prolifts S.L. for the installation of stage equipment in the amount of 16 pieces, complete with adjustable truss mount with folding clamp PSA-01 and adjustable truss mount PSD-01.
- load capacity (maximum load) – 300 kg;
- maximum height – 6.5 m;
- height when folded – 1.87 m;
- weight -129 kg;
- base overall dimensions – 2.3 x 2.3 m;
- security system – ALS – auto-locking: fixing the section at the required height, blocking the lift and preventing the lift from tipping over with the load;
- built-in wheels for easy transport;
- material – steel (black color).
Podium tables 200×100 cm, height from 20 cm to 210 cm. For mounting scenes of different configurations.

Farm aluminum 40×40, different lengths.

Farm radius 40×40, diameter 4 m and 8 m.

Sound

Attention to clients: prices for equipment rental on request.

D&B audiotechnik M4 electro-acoustic monitor – 24 pcs.

Line array module d&b audiotechnik Y8 – 20 pcs.

Line array module d&b audiotechnik Y12 – 4 pcs.

Low frequency module d&b audiotechnik Y Subwoofer – 16 pcs.

Line array module d&b audiotechnik AL90 – 4 pcs.

Module low-frequency d&b audiotechnik V Subwoofer – 4 pcs.

Sound amplifier d&b audiotechnik D20 – 8 pcs.

Sound amplifier d&b audiotechnik D80 – 6 pcs.

Meyer Sound LINA Line Array Module – 12 pcs.

Meyer Sound 750LFC Active Subwoofer – 6 pcs.

Sound processor Meyer Sound Galileo GALAXY 816 – 1 pc.

Electro-voice Phoenix PX2122 acoustic system – 2 pcs.

Acoustic system Electro-voice Phoenix PX2152 – 4 pcs

Digital Mixing Console

Midas PRO9 is a digital mixing console for medium and large projects, with a sufficient number of built-in plugins (sound processing) on board to hold any event.

Digital console stage box

Production illumination

Attention to clients: prices for equipment rental on request.

Portable Dynamic Equipment Kit:

Clay Paky Axcor 900 Profile dynamic device – 7 pcs.

Martin Atomic 3000 strobe light – 6 pcs.

dynamic device Clay Paky A.leda B-EYE K20 – 46 pcs.

dynamic Vari-Lite VL3500 Spot device – 6 pcs.

Clay Paky Axcor 300 beam dynamic device – 26 pcs.

dynamic device Light Sky Super Scope – 8 pcs.

dynamic device Robe Color Wash 1200 – 8 pcs.

dynamic device Frame Profile 800 – 8 pcs.

The automated spotlight Frame Profile 800 is designed for obtaining light projections.	Power supply	220V/50-60 Hz
	Power	1000 W
	Management protocol	DMX 512
	Number of control channels	38
	Degree of protection	IP 20
	Weight of the device, kg	38
	Overall dimensions, mm	450x450x810

LED Strobe Light Clay Paky STORMY CC – 14 pcs.

DTS Flash 2000L blinder (for 2 lamps) – 16 pcs.

DTS Flash 4000L blinder (for 4 lamps) – 12 pcs.

LED floodlight LL-L172A 200W 4in1 COB LED wash – 8 pcs.

dynamic device ColorMix 250 (manufactured by Robe) – 10 pcs.

dynamic device Martin Mac 250 (manufactured by Martin) – 10 pcs.

floodlight SGM Palco 5 RGB – 10 pcs.

G-Haze fog generator (included) – 2 pcs.

HZ-500 Professional Hazer Fog Generator – 2 pcs.

fan AF-1 (manufactured by JEM) – 4 pcs.

fan AF-2 (manufactured by JEM) – 2 pcs.

The light is controlled by remote controls:

Grand MA 2 full size control panel (manufactured by MA Lighting) – 2 pcs.

Grand MA 3 light control panel (manufactured by MA Lighting) – 1 pc.

Grand MA Micro control panel (manufactured by MA Lighting) – 2 pcs.

Grand MA Light control panel (manufactured by MA Lighting) – 2 pcs.

High End Systems Hog4 control panel – 1 pc.

LED Display Panel

Attention to clients: prices for equipment rental on request.

Video projection equipment

Attention to clients: prices for equipment rental on request.

Multimedia projectors Panasonic PT-D7700 E – 2 pcs.

The PT-D7700 3-chip WXGA DLP video projector is one of the lightest 3-chip SXGA+ DLP video projectors. With dimensions almost five times smaller than conventional DLP projectors with three DMD chips for large-scale installations, the PT-D7700 provides 7000 ANSI lumens and a contrast ratio of 4000:1, making it suitable for use in theaters, large conference rooms, High brightness and long service life are required. It is possible to install two projectors together, which provides a doubling of the luminous flux of 14,000 ANSI lumens. The projector is equipped with an interchangeable lens (long-focus or short-focus), which expands its capabilities.

Multimedia projector Nec NP60. The NP60 projector weighs only 1.6 kg and has ultra-compact dimensions (W x H x D: 246 x 72 x 177 mm). At the same time, the projection brightness is 3,000 ANSI lumens. Numerous “auto functions” such as Auto Focus, Auto Digital Keystone Correction, Auto Power Start, Quick Start, Quick Power Off and Auto Signal Recognition. In addition, XGA resolution (1,024 x 768), high contrast (1,600:1).

Multimedia projector Optoma ex-765 – 3 pcs.

Resolution:	1024×768 (XGA),
Luminous flux	4000 ANSI lumens
Distance	1.2 m – 10 m
Supported formats:	Video HDTV (480p, 576p, 720p, 1080i/p), SDTV(480i, 576i), Full NTSC, NTSC4.43, PAL PAL-M, PAL-N, SECAM, HDMI(480i/p, 576i/ p, 720p, 1080i/p)
Lamp power	280 W
Lamp life	2000 hour
Dimensions	364 x 283 x 127 mm
Weight	5.3 kg

SCREENS

Manufacturer	DRAPER
Diagonal (cm/inch)	508/200
Size (m)	3.1×4.17
Format	3:4
Material	fiberglass
Coating type	MW
Brief description	Folding front and rear projection screen
Quantity	2 pcs.

Motorized screen Cinematic Motor Screen 300×300

Surface	Matte white with fabric backing
Projection	front
Gain	1.1
Viewing angle	160 degrees
Case size, cm	340 x 28 x 28
Weight	34 kg
Power:	220 V, 50 Hz

The screen body is made of high-strength metal and can be attached to both the wall and the ceiling.
The body is octagonal in cross-section and coated with white matte paint.

Back: opaque.

Sony DSR-400 Camcorder

This is a professional video camera with a rugged design and high resolution in low light conditions. This DVCAM camcorder has many of the technical features of high end cameras, such as: full DSP processing; 65dB S/N (signal-to-noise ratio); minor vertical interference; work with cassettes of both mini and standard sizes; 2.5-inch hybrid LCD panel;

Sony HDR-FX1E Camcorder< /strong> – capable of recording video in HDV 1080i format. The model is equipped with high-quality Carl Zeiss Vario-Sonnar T optics with optical image stabilization, 12x zoom, a wide range of manual settings and supports shooting in 16:9 widescreen mode. The filming material is recorded onto a standard miniDV cassette.

Specialists of the Palace of the Republic can carry out complex multi-component installations in a short time, at the request of the customer. Our specialists will take an individual approach to solving your problem and offer the most optimal options for its implementation.

	Maximum sound pressure	140 dB
	Frequency Range	55 Hz – 17 kHz
	Speaker System Components	HF: 1.3″ LF: 15″
	Monitor Configuration	2-way stage monitor

	Maximum sound pressure	139 dB
	Frequency range	54 Hz – 19 kHz
	Speaker system components	2 x 8″ driver with neodymium magnet 1.4″ exit compression driver passive crossover network
	Monitor configuration	High performance 2-way passive line array loudspeaker
	Nominal opening angle (horizontal)	80°
	Note	Comes with a frame for suspension, and the possibility of assembly groundstack

	Maximum sound pressure	139 dB
	Frequency range	54 Hz – 19 kHz
	Speaker system components	2 x 8″ driver with neodymium magnet 1.4″ exit compression driver passive crossover network
	Monitor configuration	High performance 2-way passive line array loudspeaker
	Nominal opening angle (horizontal)	120°
	Note	Comes with a frame for suspension, and the possibility of assembly groundstack

	Maximum sound pressure	134 dB
	Frequency range	39 Hz – 140 Hz
	Acoustic system components	1 x 18″ driver with neodymium magnet 1 x 12″ driver with neodymium magnet
	Monitor configuration	High performance flyable cardioid subwoofer
	Note	Comes with a frame for suspension, and the possibility of assembling a groundstack

	Maximum sound pressure	139 dB
	Frequency range	60 Hz – 18 kHz
	Speaker system components	2 x 10″ LF driver 1 x 1.4″ exit compression driver with 3″ coil Passive crossover network
	Nominal opening angle (h x v horizontal)	90 ° x 30 °
	Note	d&b audiotechnik AL Base plate 2 pcs.

	Maximum sound pressure	137 dB
	Frequency range	37 Hz – 115 Hz
	Acoustic system components	1 x 18″ driver 1 x 12″ driver
	Electro-acoustic element configuration	High performance flyable cardioid subwoofer

	Equalizer	2 x 16-band PEQ/notch/ shelving/asymmetric
	Analog and digital input latency	0.3 – 10000 ms
	Sampling frequency	96 kHz/27 Bit ADC/24 Bit DAC
	Output power	Maximum output power per channel (THD+N <0.5%, all channels driven) CF = 6 dB at 4 / 8 ohms CF = 12 dB at 4 / 8 ohms 4 x 1000/800 W 4 x 1600/800 W
	Block nutrition	Universal range switch mode power supply with active PFC

	Maximum sound pressure	132 dB (M-noise), 128.2 dB (Pink noise), 130.2 dB (B-noise)
	Frequency range	65 Hz – 18 kHz
	Acoustic system components	Two 6.5 in long-excursion cone drivers One 3 in diaphragm compression driver coupled to a constant-directivity horn through a patented REM® manifold
	Horizontal opening angle	100°
	Maximum power	1950 W peak
	Note	Comes with a frame for suspension, and the possibility of assembly groundstack

	Full control, optimization and monitoring of the system with Compass Control software for Mac, Windows computers and the Compass Go app for iPad
	Sound processing sampling rate – 96 kHz
	ADC and DAC with characteristics – 24 bits / 96 kHz
	Ultra-low latency – 0.6 ms from input to output of the device
	Level and delay control at each point of the device matrix
	5-band U-shaping filters on inputs and outputs
	5-band parametric equalizers on inputs and 10-band parametric equalizers on outputs
	High/low pass filters with slope up to 48 dB/octave
	Additional asynchronous sample rate converters for AES3 inputs
	Low-Mid Beam Control for full-range line array coverage
	Atmospheric correction filters
	Interoperability with third-party Milan-certified equipment: support for AVB redundancy, seamless failover, and AAF and CRF packet delivery; AVB stream synchronization across multiple GALAXY processors
	Policies for access restriction and protection for different users
	Easy integration with third-party controllers such as AMX and Crestron

	Maximum sound pressure	102 dB
	Frequency range	60 – 19000 Hz
	Acoustic system components	2″ ND2 drivers Two 12-inch Electro-Voice DVX3121 low-frequency speakers
	Opening angle	45-30°
	Note	Part of the Electrovoice Phoenix 3 TOP/1SUB electro-acoustic set

	Maximum sound pressure	99 dB
	Frequency range	50 – 18000 Hz
	Acoustic system components	2″ ND2 drivers Two 15-inch Electro-Voice DVX3150 low-frequency speakers
	Opening angle	60-45°
	Note	Part of the Electrovoice Phoenix 3 TOP/1SUB electro-acoustic set

	Mic/line inputs with Midas PRO mic preamps	88
	Input Channels	88
	Analog Outputs	32
	Busses with Delay Sync and Phase Correction	35
	Multi-Channel Effects Processors	8
	Klark Teknik DN370 Graphic Equalizers	36
	Built-in Display	2 x 15″ full-color TFT displays for easy operation bright daylight
	VCA groups	10
	POP groups	6
	Midas PRO faders	29 motorized 100mm
	Internal digital processor	96 kHz, 40 bit, floating point
	App and software	App for remote control of the console using a personal tablet running Apple OS

	Modular stage box with 8 slots for DL4 series I/O cards
	Up to 64 inputs and 64 outputs
	24-bit/96 kHz sampling rate
	Remote operation from up to 100 m away, connection via CAT5/5e cable
	All settings can be made either on the user console of the device or from the central audio control panel
	Power supply operation indicators and LCD display on the front panel
	4 AES50 network ports from Neutrik
	2 GPIO on 25-pin D-Sub connectors for external device control
	MIDI in, out and pass-through
	7U rackmount only
	Universal power supply with 2 redundant supplies

The Axcor 900 Profile LED spotlight is designed to create static and dynamic lighting.	Power supply	220V/50-60 Hz
	Power	1400 W
	Management protocol	DMX 512
	Number of control channels	38/42
	Weight of the device, kg	45
	Overall dimensions, mm	442x424x674 (874)

The ATOMIC 3000 strobe light is designed to generate and simulate flashbulbs and lightning discharges.	Power supply	220V/50-60 Hz
	Power	3000 W
	Number of control channels	4
	Weight of the device, kg	7,5
	Overall dimensions, mm	245x425x240

The G-Haze light fog generator is used to create a light transparent fog that gives a magical atmosphere to the stage show when lighting effects work.	Power supply	220V/50-60 Hz
	Power	800 W
	Tank capacity	2.0 L
	Liquid consumption	55-100 ml/hr
	Management protocol	DMX 512
	Working gas pressure, Mpa	0,35-0,45
	Weight of the device, kg	18,2
	Particle size, microns	0,5-0,7
	Overall dimensions, mm	700x190x325

LED Screen Light Rn4-B (60 modules)	The screen is designed for indoor use. • Module height – 480 mm; • Module width – 640 mm; • Module depth – 148 mm; • The panel area is 0.3072 sq.m. • The ratio of width to height is 4:3; • Physical resolution (pixel spacing) – 4.44 mm; • Pixel Technology – Black SMD 3 in 1; • Screen brightness – 2000 Nit (candela per 1 sq.m.); • Horizontal viewing angle (white field – half brightness) – 150 degrees. (+75/-75); • Vertical viewing angle (white field -half brightness) – 120 degrees. (+60/-60); • Contrast ratio – 3300:1; • Number of colors – 281 trillion; • Screen refresh rate – 100,000 Hz; • Processing depth – 16 bits; • The input power of the module is 456 watts; • Module weight – 19 kg; • Protection class IP40/IP20; • The operating temperature limit is from 0 to +40 degrees Celsius; • Input format – SDI, RGBHV, YUV, YC, Composite; • Supply voltage – 100 – 240 Volts; • The frequency of the supply voltage is 50-60 HzControl controller: • Input signal formats – VBS with BNC connector, DVI-I, SDIx1 with BNC connector (SD-SDI (SMPTE259M-C)/HD-SDI (SMPTE292M); • Input Terminals – DVI-I: DVI connector, SD-SDI/HD-SDI: 75-Ohm BNC, VBS: 75-ohm BNC, RS232C: 9-pin D-sub Male, Ethernet: RJ45, GenLock: 75-ohm BNC, SDI Return: 75-ohm BNC; • Access to the control monitor with the transmission of service information; • Image Correction – Size, Positioning, Brightness/Contrast/Gain/Pedestrian/Gamma Correction, Color/Hugh, Chroma, Color Temperature, Brightness Control, Sharpness; • Changing the shape of the image; • Control via Ethernet or RS-232C protocol.
LED screen (LED display TSD-1-Ts1.85-7380-9920) (250.36 m²)	Main technical characteristics: • LED tour screen area (total) – 250.36 m², module size 592×666 mm; • Physical pixel pitch – 1.85 mm; • Pixel design – LED in SMD case, RGB 3 in 1, completely black LED case; • Maximum power consumption – 650 W/m2; • Maximum power consumption of one 592×666 mm module – 28 W; • Average power consumption – 172 W; • Screen refresh rate – 3840 Hz; • Viewing angle, horizontal/vertical – 160/140 degrees; • Calibrated screen brightness – 800 NIT at a color temperature of 6500 K; • Grayscale bit depth – 16 bits; • Availability of digital inputs – DVI/HDMI/HDSDI; • Power supply voltage – 230V±10%, 50Hz; • Conditions of use – indoors; • Overall dimensions of the module, WxH – 592mm x 666mm; • Weight of the module in a frame 592x666mm – 19kg.
LED screen for touring TSD-1-Ts1,85-5760-7680-I-2-0 (150.20 m²)	Main technical characteristics: • LED tour screen area (total) – 150.20 m², module size 592×666 mm; • Physical pixel pitch – 1.85 mm; • Pixel design – LED in SMD case, RGB 3 in 1, completely black LED case; • Maximum power consumption – 650 W/m2; • Maximum power consumption of one 592×666 mm module – 28 W; • Average power consumption – 172 W; • Screen refresh rate – 3840 Hz; • Viewing angle, horizontal/vertical – 160/140 degrees; • Calibrated screen brightness – 800 NIT at a color temperature of 6500 K; • Grayscale bit depth – 16 bits; • Availability of digital inputs – DVI/HDMI/HDSDI; • Power supply voltage – 230V±10%, 50Hz; • Conditions of use – indoors; • Overall dimensions of the module, WxH – 592mm x 666mm; • Weight of the module in a frame 592x666mm – 12kg.
Outdoor LED screen (a means of displaying information for collective use SOICP 03.01.003,910.01)	Main technical characteristics: • LED screen area (total) – 150 m², module size 500×500 mm; • Type of supply current: alternating; • IC supply voltage/current: 220V +/- 10%, 50Hz; • Power consumption (peak) – 1200 W/m2; • Operating life – 100,000 hours; • Viewing angle – ±140°/±120°; • Pixel pitch – 3.91 mm; • Pixel – 1 OUTDOOR SMD (RGB) configuration; • Brightness – 5000 Cd/m2; • Refresh rate – 3840 Hz; • The design observation distance is 4 m; • Number of pixels – 9,811,516; • Output image files in the following formats: – MP4, 3GP, AVI, WMV, FLV, MKW, MOV, MPG, MPEG, TS, VOB, WEBM, ASF, GIF, JPG, JPEG, PNG, BMP; • Information output port – DVI, HDMI, OPT; • Inputs – 1 x DP, 4 x 12G-SDI, 1 x HDMI, 4 x DVI; • Protection class against electrical damage. By electric current; • The service life of light sources is 100,000 hours; • Degree of protection against penetration of foreign bodies and water (in accordance with STB IEC 60598-1-2008) – IP65; • Operating temperature -20 ≤ t°C ≤ +50; • The presence of drag. metals and rare earths.There are No elements.Operating conditions • Ambient temperature – -20 ≤ t°C ≤ +50; • Atmospheric pressure – 100kPa (750,64 mmHg); • Relative humidity – 90 ± 2%;The screen is mounted by modules. The possibility of installing modules at an angle of +- 15 degrees

LED spotlight moving head A.LEDA D-EYE K-20 is designed to create static and dynamic lighting.	Power supply	220V/50-60 Hz
	Power	800 W
	Number of control channels	21/35
	Weight of the device, kg	21
	Overall dimensions, mm	589x460x395

The automated spotlight Vari-Lite VL3500 Spot is designed for obtaining light projections.	Power supply	220V/50-60 Hz
	Power	1400 W
	Number of control channels	31
	Degree of protection	IP 20
	Weight of the device, kg	41
	Overall dimensions, mm	457x828x508

The Axcor 300 beam LED floodlight is designed to create static and dynamic lighting.	Power supply	220V/50-60 Hz
	Power	110 W
	Management protocol	DMX512/RDM/ WebServer/ArtNet
	Number of control channels	DMX 14/16
	Weight of the device, kg	17,6
	Overall dimensions, mm	345x268x492

The LED profile spotlight Light Sky Super Scope is designed to create static and dynamic lighting.	Power supply	220V/50-60 Hz
	Power	700 W
	Management protocol	DMX512/RDM/ WebServer/ArtNet
	Number of control channels	DMX 27/33
	Degree of protection	IP 20
	Weight of the device, kg	33,2
	Overall dimensions, mm	510x300x731

The Robe Color Wash 1200 automated spotlight is designed to produce light projections.	Power supply	220V/50-60 Hz
	Power	1400 W
	Management protocol	DMX 512
	Number of control channels	17
	Degree of protection	IP 20
	Weight of the device, kg	42
	Overall dimensions, mm	620x537x525

The STORMY CC strobe light is designed to produce scenic effects simulating flashbulbs and lightning discharges.	Power supply	220V/50-60 Hz
	Power	850 W
	Number of control channels	7
	Weight of the device, kg	7,2
	Overall dimensions, mm	295x455x155

The Blinder 2000 floodlight lamp is designed for static stage lighting.	Power supply	220V/50-60 Hz
	Power	1300 W
	Degree of protection	IP 20
	Management protocol	DMX 512
	Weight of the device, kg	2,96
	Overall dimensions, mm	350x235x150

The Blinder 4000 floodlight lamp is designed for static stage lighting.	Power supply	220V/50-60 Hz
	Power	2700 W
	Degree of protection	IP 20
	Management protocol	DMX 512
	Weight of the device, kg	4,5
	Overall dimensions, mm	311x620x220

The LL-L172A 200W 4in1 COB LED wash floodlight is designed for static stage lighting.	Power supply	110-240V/50-60Hz
	Power	200 W
	Management protocol	DMX 512
	Number of control channels	4/8
	Weight of the device, kg	5,7
	Overall dimensions, mm	370x250x250

The ColorMix 250 spotlight is designed to create static color lighting.	Power supply	220V/50-60 Hz
	Power	330 W
	Management protocol	DMX 512
	Number of control channels	11
	Weight of the device, kg	13
	Overall dimensions, mm	230x410x390

The MAC – 250 spotlight is designed to create static and dynamic lighting.	Power supply	220V/50-60 Hz
	Power	330 W
	Management protocol	DMX 512
	Number of control channels	14/17
	Weight of the device, kg	22,4
	Overall dimensions, mm	375x538x315

The Palco 5 RGB full-turn LED floodlight is designed for use in theaters, television studios, during concert and exhibition events.	Power supply	220V/50-60 Hz
	Power	260 W
	Management protocol	DMX 512
	Number of control channels	8
	Degree of protection	IP 55
	Weight of the device, kg	13,5
	Overall dimensions, mm	425x375x229

The HZ-500 Professional Hazer generator is designed to create a fog curtain on the stage.	Power supply	220V/50-60 Hz
	Power	480 W
	Tank capacity	2.5 L
	Liquid consumption	15 h/l
	Management protocol	DMX 512
	Number of control channels	1
	Weight of the device, kg	31,5
	Overall dimensions, mm	490x351x338

The AF-1 fan is designed to disperse smoke and fog, direct smoke into chimneys, create wind, and cool equipment.	Power supply	220V/50-60 Hz
	Power	175 W
	Management protocol	DMX 512
	Number of control channels	1
	Weight of the device, kg	10
	Overall dimensions, mm	390x400x180

The AF-2 fan is designed to disperse smoke and fog, direct smoke into chimneys, create wind, and cool equipment.	Power supply	220V/50-60 Hz
	Power	245 W
	Management protocol	DMX 512
	Number of control channels	1
	Weight of the device, kg	17
	Overall dimensions, mm	682x707x318